六转子微型飞行器及其低雷诺数下的旋翼气动性能仿真

提出了一种新结构的六转子无人飞行器的概念,该飞行器可以在空间任意方向飞行,甚至可以在地面上滚动前进。分析了其可能的三种构型并给出了各自的运动方程,给出了三轴解耦时该飞行器的配置方式及转子空间位置。由于该飞行器具有小尺寸外形、低重量和飞行速度慢的特点,根据转子速度、弦长和飞行模态,计算得该飞行器的雷诺数变化范围为1×104到12.8×104。以选用的Eppler 387翼型作为分析对象,采用正投影混合网格方法对其在低雷诺数下的气动性能进行研究,得到了雷诺数分别为1×104,2×104,3×104和6×104下对应不同迎角的升力系数、阻力系数和升阻比,并对雷诺数为6×104下的升力系数仿真结果同试验结果进行了对比,二者具有较好的一致性。制作了六转子微型飞行器样机,实现了垂直起降及慢速前飞。     

基于梯度方向二值模式特征的飞机翼尖跟踪技术

研究基于视频图像分析与定位的飞机翼尖跟踪技术,为飞机地面移动提供安全保障.现有图像特征进行翼尖跟踪经常失效且计算效率低下,本文结合纹理和轮廓信息,提出以梯度方向二值模式( OG_ LBP)为特征的粒子滤波跟踪算法,降低特征维数的同时建立局部和全局的翼尖特征直方图描述,提高识别效果.同时,该算法在粒子滤波基本框架之下,结...     

基于协同多任务分配的飞机排班模型与算法

航空公司的航班运行一直存在安全与成本的矛盾:既要严格按规定完成飞机例行检修,优先保障运行安全,又要尽可能提高飞机日利用率,以降低运行成本.为此,研究基于协同多任务分配的飞机排班问题.分析例行检修约束,建立最优化飞机日利用率的数学模型,运用分枝定价算法进行求解.分枝定价算法引入检修节点和虚拟飞机节点的定义,将分配的航班飞...     

引气提升轴流压气机性能的数值研究

以低速单级压气机为研究对象,根据引气对压气机性能的影响机理设计了6种引气方案,通过数值模拟,讨论了引气对压气机总压升、稳定裕度的影响.结果表明:对于角区大分离的静子,在靠近吸力面的机匣上和叶片吸力面近轮毂区域同时引气可以以较小的引气量获得压气机总压升和稳定工作裕度的全面提升.研究结论有力地支持了空气系统气源引气与压气机...     

气体润滑弹性波箔片轴承动态特性分析

通过摄动方法并结合气体润滑压力控制Reynolds方程和气膜压力、气膜厚度及箔片变形等变量的Taylor展开式,推导出弹性波箔片轴承气膜动力特性系数计算微分方程组.同时,考虑气体可压缩性等因素,建立气膜厚度、箔片变形和气膜压力三者之间关系的数学模型方程组.运用Newton-Raphson迭代法和有限差分法耦合求解气膜动...     

Surface Roughness Effects on Vortex Torque of Air Supported Gyroscope

In order to improve the drift precision of air supported gyroscope, effects of surface roughness magnitude and direction on vortex torque of air supported gyroscope are studied. Based on Christensen’s rough surface stochastic model and consistency transformation method, Reynolds equation of air supported gyroscope containing surface roughness information is established. Also effects of mathematical models of main machining errors on vortex torque are established. By using finite element method, the Reynolds equation is solved numerically and the vortex torque in the presence of machining errors and surface roughness is calculated. The results show that surface roughness of slit has a significant effect on vortex torque. Transverse surface roughness makes vortex torque greater, while longitudinal surface roughness makes vortex torque smaller. The maximal difference approaches 11.4% during the range analyzed in this article. However surface roughness of journal influences vortex torque insignificantly. The research is of great significance for designing and manufacturing air supported gyroscope and predicting its performance.     

Research into Configuration and Flow of Wall Oil Film in Bearing Chamber Based on Droplet Size Distribution

The lubrication design and heat transfer determination of bearing chambers in aeroengine require a sufficient understanding of the oil droplet-film interaction and physical characteristic in an oil/air two-phase flow state.The analyses of oil droplet movement,mass and momentum transfer during the impingement of droplet/wall,as well as wall oil film thickness and flow velocity are very important for the bearing chamber lubrication and heat transfer calculation.An integrated model in combination with droplet movement,droplet/wall impact and film flow analysis is put forward initially based on the consideration of droplet size distribution.The model makes a contribution to provide more practical and feasible technical approach,which is not only for the study of droplet-film interaction and physical behavior in bearing chambers with oil/air two-phase flow phenomena,but also useful for an insight into the essence of physical course through droplet movement and deposition,film formation and flow.The influences of chamber geometries and operating conditions on droplet deposition mass and momentum transfer,and wall film thickness and velocity distribution are discussed.The feasibility of the method by theoretical analysis is also verified by the existing experimental data.The current work is conducive to expose the physical behavior of wall oil film configuration and flow in bearing chamber,and also significant for bearing chamber lubrication and heat transfer study under oil/air two-phase flow conditions.     

航材送修可视化管理浅析

利用现代网络技术建立航材送修可视化管理系统,有效减少航材送修流程中监控的盲点,暴露航材送修过程中的问题,从而提高航材送修周转率,降低航材送修周期。     

加油机加油过程视频监控需求分析

通过对一般加油过程的分析,提出了空中加油机加油过程视频监控需求。将加油过程分为会合、编队、对接、解散四个部分对监控区域进行讨论,并对监控区域进行整理及优化,从功能、分辨率及显示等方面进行分析,给出适应性的视频监控需求,为机外摄像头布局,摄像头和显示器选型,机外照明布置提供有效支持。     

Computational engineering analysis of external geometrical modifications on MQ-1 unmanned combat aerial vehicle

This paper focuses on the effects of external geometrical modifications on the aerodynamic characteristics of the MQ-1 predator Unmanned Combat Aerial Vehicle (UCAV) using computational fluid dynamics. The investigations are performed for 16 flight conditions at an altitude of 7.6 km and at a constant speed of 56.32 m/s. Two models are analysed, namely the baseline model and the model with external geometrical modifications installed on it. Both the models are investigated for various angles of attack from −4° to 16°, angles of bank from 0° to 6° and angles of yaw from 0° to 4°. Due to the unavailability of any experimental (wind tunnel or flight test) data for this UCAV in the literature, a thorough verification of calculations process is presented to demonstrate confidence level in the numerical simulations. The analysis quantifies the loss of lift and increase in drag for the modified version of the MQ-1 predator UCAV along with the identification of stall conditions. Local improvement (in drag) of up to 96% has been obtained by relocating external modifications, whereas global drag force reduction of roughly 0.5% is observed. The effects of external geometrical modifications on the control surfaces indicate the blanking phenomenon and reduction in forces on the control surfaces that can reduce the aerodynamic performance of the UCAV.